Runtime - Siemens SITOP PSU8200 Manual

6 Selective monitoring of 24V feeders
Note
In the example, an additional small square is configured as an LED lamp to
represent the status of the assembly in color. With the square, the background
color is dynamized and linked to the process values of the monitoring block.

OUT#Value = 0 -> green

OUT#Value = 1 -> red
6.6

Runtime

After starting runtime and switching to the corresponding technological hierarchy, it
is now possible to monitor the status of the selectivity module on the OS. Apart
from this, the system issues a message in the case of a fault.
Once you have eliminated the fault, you can reset the module using the operator block.
Fig. 6-10
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908, V1.0, 04/2016
46