Siemens SITOP PSU8200 Manual page 25

5 Uninterruptible 24 V power supply
Configuring the hardware
The next thing to do is to update the UPS1600 in the hardware configuration
The procedure is as follows:
1. Drag the UPS1600 from the device catalog (1) onto the PROFINET IO system
of the AS.
2. Open the properties of the DC UPS and enter the device name (2) and the
device's IP address (3).
Fig. 5-3
Setting the SITOP UPS1600 parameters
You can set the hardware parameters of the UPS1600 in the HW configuration too.
You can find more detailed information on the different parameters in the manual
entitled SITOP UPS1600 /
Integration of a SITOP 24 V Power Supply in PCS 7
Entry ID: 109481908, V1.0,
2
3
UPS1100.
04/2016
1
25