Roger B70/2DC Instruction And Warnings For The Installer page 57

12
DISPLAY
ed or incorrectly connected.
nected or incorrectly connected
(BM20, BR20, BR21, BE20 or
series, if parameter is set to
)
incorrectly connected.
incorrectly connected.
nected (for
parameter is set to
nected (for
parameter is set to
be incorrectly connected.
rectly connected.
N.B.
POSSIBLE CAUSE
STOP contact is open.
COS1 not connect-
COS2 not con-
FT1 not connected or
FT2 not connected or
-
series only if
).
-
series only if
).
ACTION BY SOFTWARE
-
used or to disable.
used or to disable.
if not used or to disable.
if not used or to disable.
-
-
-
-
-
-
-
-
Install a STOP
ST
COM contact.
if not Jumper contact COS1
tact COM, if not used or to dis-
able
if not Jumper contact INP2
COM, if not used or to disable.
e Jumper contact FT1
COM, if not used or to disable.
e Jumper contact FT2
COM, if not used or to disable.
PP - COM contacts and
- COM contacts and
AP - COM contacts and
PED - COM contacts and
INP1 - COM contacts. Con-
used.
IT EN
-
-
-
57 57