Maintenance; Troubleshooting - EMS AIRFLOW ONE Quick Manual

CLEAN
EACH MORNING Rinse
1
H O
2
Place your water bottle Set water to 10,
onto the device. Turn the device ON.
BETWEEN Each patient
1
Clean the outside surface of the Reprocess your Handpieces.
device with a cloth and alcohol.
END OF DAY Clean
1
NIGHT
CLEANER ®
Place your NIGHT CLEANER Set water to 10.
®
bottle onto the device. Turn the device ON.
6
2 3
10
Hold the cord above the Press the pedal during 30
sink.
2
2 3
10
Hold the cord above the Press the pedal during
sink.

MAINTENANCE

EN
CHECK IT
4
Check the blue water filter and
change it if needed.
seconds.
EACH YEAR
Send your device to your authorized EMS repair center.

TROUBLESHOOTING

Handpiece clogged
Use Easy Clean
4
Service needed
Stop using your device.
Batteries low
Change pedal batteries.
30 seconds.
Preventive maintenance
1
2
Place the Easy Clean Then take a syringe
into the handpiece. filled with water.
EN
3
AIR
H O
2
Dry both sides of handpiece
with compressed air.
Missing cord
Check your cord connection.
Overheating
Wait for cooling.
If error repeats, call service .
7