Maintenance; Info - Krups ESPRESSO AUTOMATIC EA85 Series Manual

Unit of
measurement
Screen brightness
Coffee temperature You can adjust the temperature of your recipes based on three
Water hardness
Auto-on
Auto-off
Auto rinse
Recipe settings

Maintenance

All these options allow you to start the selected programmes. You then have to follow the on-
screen instructions.
Rinsing
Cleaning
Descaling
Filter
To exit the maintenance menu, press

Info

The "Info" menu allows you to access a certain amount of information on your use and certain
stages in the life of your appliance. It also provides information on the appliance's maintenance.
Below is the main information available.
Drinks prepared
Coffee cleaning
circuit
Descaling
Filter
14
You can choose between ml and oz.
You can adjust the screen contrast to your preference.
levels.
You should adjust the water hardness between 0 and 4. See
chapter "Measuring water hardness".
You can set the automatic pre-heating to a certain time.
You can choose the time after which your appliance will automa-
tically switch off (time without use).
You can choose whether or not to activate automatic rinsing of
the coffee nozzle when the coffee maker is switched on.
You can also return to the default settings of the recipes.
Allows you to access rinsing of the One Touch Cappuccino block or
the appliance.
Allows you to access cleaning of the One Touch Cappuccino block
or the appliance.
Allows you to access the descale programme.
This function is not active until the number of recipes made has been
reached.
Allows you to access the filter programme.
.
Display the total number of ristretto, espresso, coffee, cappuccino /
latte, and the total recipes.
Indicates that it should be carried out every x quantity of cycles.
Indicates that it should be carried out every x quantity of cycles.
Indicates that this should be changed after x days or x litres.