Download Print this page

Charging The Battery - Bosch Active Plus Series Quick Start Manual

Powertube 500 battery and remote control
Hide thumbs


Step 1
Attach the display
Step 2

Charging the battery

The battery can be charged in two ways:
Through the frame
Ensure the display is turned on as this will display
the charging level. Lift the plastic cover on the LH
side of the seat tube to reveal the charging port.
Charging the battery
(a) Insert the key and turn clockwise to
unlock the battery.
(b) Hold down the button in the bottom
end of the battery.
(c) Remove the battery to reveal the charging point.
When charging is complete the LED lights on
the battery will switch off. When replacing the
battery ensure it is fully locked down.
the frame
Direct by removing
the battery



This manual is also suitable for:

Active seriesIntuvia series