Bijur Delimon DP33 Manual

DP33 Pump
60:1, 3+3, Air-operated, Grease
General
The DP33 Pump is a compressed air-operated reciprocating piston pump designed to pump all types
of mineral greases. Suitable for installations with medium length piping to supply up to three grease
outlets simultaneously. This pump is mounted directly on 120 lb and 400 lb drums.
Operation
This pump is self-priming. To prime it the fi rst time, connect the air supply to the pump while keeping
the outlet gun opened and increase the air pressure from 0 to the desired pressure slowly using a
pressure regulator. Once grease starts fl owing through all the outlets, the pump is primed. The pump
starts to pump automatically when the outlet valve is opened. (Note: It is important that the lower
valve does not come into contact with contaminated surfaces, such as a workshop fl oor, as it may
become contaminated with dirt or foreign particles that can damage the pump mechanism.)
Technical Data
Maximum Air Pressure
Minimum Air Pressure
Maximum Delivery @ 100 psi
Air Inlet Thread
Grease Outlet Thread
Air Piston Diameter
Air Piston Stroke
Installation
To install the pump on the drum, use the
included bung adapter. Fasten the cover
(part #F1936 for 120 lb keg and part #F1938
for 400 lb drum) onto the drum and screw the
nut of the bung adapter into the 2" bung
opening of the cover. Insert the pump through
the nut and fi x it with the star nut to the desired
height.
1
140 psi (10 bar)
40 psi (3 bar)
2.6 lb (1200 gr/min)
3/8" BSP
3/8" BSP
3" (75mm)
3" (75mm)
Always keep fi ngers and hands away from
moving parts. Do not dent or damage the
riser tube.
Ensure that the mounting surface and
attachments are strong enough to
support the lift and pump assembly
during operation.
BIJUR DELIMON INTERNATIONAL
(919) 465 4448 LOCAL
(800) 631 0168 TOLL-FREE
(919) 465 0516 FAX
WWW.BIJURDELIMON.COM
2100 Gateway Centre Blvd., Suite 109
Morrisville, NC 27560
35994 • R2 08/15