Weslo W&S WLIVEX85610.1 User Manual page 6

STEP 4
Attach the Pedal (22L/R) to the Crank (25L/R) of the Main
frame (1) use the Cross solid wrench.
Note: The left pedal (22L) should be tighten in the counter-
clockwise direction, the right pedal (22R) should be tighten
in the clockwise direction.
STEP 5
Insert the Saddle (36) into the Saddle horizontal (35) and
then fix it using the Cross wrench.
Adjust the Saddle Horizontal post (35) to a suitable posi-
tion, and then fix it onto the Saddle post (30) with Knob nut
(31) and Flat washer (32).
Insert the Saddle post (30) into the post of Main frame (1),
and then fix with Pop-pin knob (28) .
Note: Before the campaign to ensure that the saddle (36)
locking in the Saddle horizontal (35).
STEP 6
Connect the Pulse sensor wire (19) and Sensor connect
wire (13) with the wires of Computer (4) respectively, and
then fasten the Computer (4) onto the computer bracket of
the Handle post (11) with Cross head screw (5) and Flat
washer (23) as shown..
5