Table of Contents
Advertisement
Connecting to a personal computer or a deskphone
About this task
Use this procedure to connect your Avaya IX
a deskphone with a cable. When connected, the phone becomes an echo-cancelling device. This
connection ensures better sound quality that can be manually adjusted in the appropriate
applications on the PC.
Before you begin
Prepare USB micro Type B receptacle for connection purposes.
Procedure
1. Use the USB cable to connect the phone and the computer.
The Avaya IX
2. (Optional) Access the computer settings and select the phone as the audio device. The
computer's operating system automatically selects the phone as a speaker and
microphone.
3. (Optional) Restart the software to switch to the new audio device if the computer has
active software that is using the computer's built-in speakers.
Managing VoIP calls through a PC
About this task
Use this procedure to manage VoIP calls through a personal computer or a laptop. The phone
functions as a speaker and microphone for the PC.
Before you begin
• Turn on the PC.
• Connect Avaya IX
• Select Avaya IX
• Run the VoIP software.
Procedure
1. In the VoIP software, select the contact to call.
2. Dial the number and talk to your contact. Note that during an active USB call, incoming
VoIP calls are rejected with a busy signal.
3. End the call in the computer's VoIP software.
The phone functions as a speaker for the computer.
September 2019
™
Conference Phone B199 screen shows that the USB mode is enabled.
™
Conference Phone B199 with the USB receptacle to the PC.
™
Conference Phone B199 as the audio device in the computer's settings.
Using Avaya IX
Comments on this document? infodev@avaya.com
™
Conference Phone B199 to a personal computer or
™
IP Conference Phone B199
USB cable connection
33
Advertisement
Table of Contents
