Avaya IX B199 Manual page 30

Settings configuration and management
Name
Security
Factory reset
Time and region
NTP enable
NTP server
Date
September 2019
Description
To change the administrator's password.
Note:
You can configure this parameter in case of logging in with the
administrator's password.
Important:
For security reasons, you can change the administrator's password only
on the phone.
To reset the phone to its factory settings. By resetting the phone to its factory
setting, you remove all the configurations set, exported and installed in course
of the phone's use.
Note:
You can do the factory reset only if you log in with the administrator's
password and only on the phone.
To enable or disable the Network Time Protocol (NTP).
Note:
You can configure this parameter in case of logging in with the
administrator's password.
To specify the NTP server when NTP is enabled. By default the phone uses the
following NTP server: 0.pool.ntp.org.
Note:
You can configure this parameter in case of logging in with the
administrator's password.
To set the current date. The date is set in the mm/dd/yyyy format. You can
specify it by doing the following:
• Manually enter the date in the field.
• Use the up and down arrows to move through a set of fixed values for the
date, month, and year.
• Select a date from the drop-down calendar.
You can also click the icon to delete the value that is available and enter the
date you want.
™
Using Avaya IX IP Conference Phone B199
Comments on this document? infodev@avaya.com
Table continues...
30