Managing Contacts; Configuring The Avaya Conference Assistant Settings - Avaya IX B199 Manual

• Dial a number by using the keypad.
The phone dials the number, and the call starts. The screen displays the name of the
person with whom you are speaking if this number is registered in the phone book.
2. (Optional) Do one or more of the following:
a. Adjust the volume on the screen of you mobile device by moving the Volume up
slider.
b. Add additional participants by tapping the Add participant icon.
c. Split the conference call to separate calls by tapping Conference.
d. Mute the microphone by tapping Mute. To unmute, tap Mute again.
e. Enter Dual Tone Multi Frequency (DTMF) digits by tapping Keypad.
f. Put the call for any participant on hold by tapping Arrow > Hold.
g. Talk to any participant in private by tapping Arrow > Private.
h. Disconnect any participant from the call by tapping Arrow > Hang up.
3. Tap Hang up to end the call.

Managing contacts

About this task
Use this procedure to manage contacts with Avaya
Procedure
1. On your mobile device, open Avaya
2. Tap the Contacts icon.
3. To add a contact to your favorite contacts list, tap the Contacts tab and press the star
symbol near the selected contact.
4. To open a list of you favorite contacts, tap Favorites.
5. To create a new conference group in the phone book, tap Groups > Plus on the screen.
Configuring the Avaya
About this task
Use this procedure to configure the Avaya
installed on a mobile device.
Procedure
1. Run Avaya
September 2019
®
Conference Assistant settings
®
Conference Assistant on your mobile device.
Using Avaya IX
Comments on this document? infodev@avaya.com
®
Conference Assistant.
®
Conference Assistant.
®
Conference Assistant settings from the application
™
IP Conference Phone B199
®
Avaya Conference Assistant
39