Table of Contents
Advertisement
2. Configuration Settings via WebAccess/DMP
If your router has been pre-installed with the WebAccess/DMP client, you may configure it
from WebAccess/DMP. Navigate your browser to:
If this is your first time, please register with the site. If not, please login with your username
and password. Once logged in, further assistance can be found here:
http://hub.bb-smartworx.com/Login/Help?HelpFile=hub.pdf
3. Restoring and Backing up the Router Configuration
After you reset the router, the current configuration is overwritten by the default settings.
We recommend that you back up the router configuration before resetting the device. Refer to
the Configuration manual for more information.
When the PWR LED starts blinking, it is possible to restore the default configuration of the
router by pressing the RST button on the rear panel. After pressing this button, the default
configuration is restored and then the router reboots (green LED will be on).
Important Notes
After logging on to the device for the first time, we strongly recommend changing the
default password due to security reasons. Simultaneously, you will gain access to all
functions of the router.
For security reasons, it is highly recommended to update the firmware of the router to the
latest version regularly. Downgrading the firmware to an older version than the production
version or uploading a firmware intended for a different device may cause the malfunction
of the device.
Documentation
User's Manual and Configuration Manual for the router can be found and downloaded on
this web site:
www.advantech-bb.cz/download
Hereby, Advantech Czech s.r.o. declares that the radio equipment type SmartFlex
SR300 (versions with radio interface only), SR303, SR304, SR305, SR306 and SR307
is in compliance with Directive 2014/53/EU.
SmartFlex SR300 versions without radio interface are in compliance with the essential require-
ments and other relevant provisions of Directives 2014/30/EU and 2014/35/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
www.advantech-bb.cz/eudoc
QSG-0002-EN, January 24, 2020
https://hub.bb-smartworx.com
14
SmartFlex
Released in the Czech Republic
Advertisement
Table of Contents
