IBM Storwize V7000 Unified Manual page 94

Figure 27. Removing the enclosure end cap
2. Remove a screw from the hole behind each enclosure end cap, as shown below.
Figure 28. Securing an enclosure to a rack cabinet
3. Carefully slide the enclosure out of the rack along the rails.
4. Repeat this procedure for each additional enclosure that you remove.
Removing and reinstalling the enclosure rails
These instructions guide you through repositioning existing enclosure rails.
About this task
Removing the enclosure and rails
74
IBM Storwize V7000 Unified: Adding Storwize V7000 File Modules to an existing Storwize V7000 system 2073-720