IBM Storwize V7000 Unified Manual page 38

Table 21. Ethernet service address configuration for the control enclosure (continued)
Configuration item
IPv6 prefix
Service IPv4 address
Gateway IPv4 address
IPv4 subnet mask
Service IPv6 address
Gateway IPv6 address
IPv6 prefix
Attention: Do not attach Ethernet cables to the network if a conflict exists with
the default IP addresses. A utility is provided on the USB flash drive, Figure 1, to
reset the default service IP addresses (if necessary), and to resolve any IP address
conflicts.
Figure 1. USB flash drive.
Keep the USB flash drive in a safe location to use for other periodic tasks, such as
resetting a password.
Use Table 22 to configure the system for event notification.
Table 22. Event notification settings
Configuration item
E-mail server addresses
SNMP server addresses
SNMP community strings
Syslog servers
18
IBM Storwize V7000 Unified: Adding Storwize V7000 File Modules to an existing Storwize V7000 system 2073-720
Value
Node canister 2 service port 1
192.168.70.122
255.255.255.0
Value