Advertisement
• W145 (N5245-20066) REF 2 RCVR R2 IN to A27 mixer brick (R2)
* As shown in
Figure
Figure 10
Location of Cable Clamp to Secure W145 (N5247-20066)
• W116 (N5247-20080) A45 port 2 bias tee to A36 port 2 coupler
• W121 (N5247-20024) Port 4 RCVR D IN to A48 port 4 receiver attenuator
• W111 (N5247-20021) Port 4 CPLR THRU to A44 port 4 bias tee
• W42 (reuse) (N5247-20026) A35 port 4 coupler to front-panel port 4 CPLR ARM
• W110 (N5247-20025) A40 port 4 source attenuator to front-panel port 4 SOURCE OUT
24
10, install one clamp, part number 1400-1334, to secure W145 (N5245-20066).
Installation Note N5247-90103
Advertisement
