Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
Step 22. Position the Cables and Wires to Prevent Pinching
On the top side of the PNA, carefully position the grey flex cables so they can't
be pinched between the covers and the rails.
On the bottom side of the PNA, carefully fold or push down the ribbon cables
and wires so they can't be pinched between the hardware and the outer cover.
Ribbon cables and wires must never be positioned on top of hardware.
Step 23.Reinstall the Inner Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
Step 24.Reinstall the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
Step 25.Enable Option 400
Procedure Requirements
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— Obtain a license key for installation of this upgrade by following the
Option Enable Procedure
1. To start the option enable utility, press UTILITY
2. Click the arrow in the Select Desired Option box. A list of available options
3. In the Select Desired Option list, click P04 - 4-Ports.
4. Using the keyboard, enter the license key in the box provided. The license
5. Click Enable.
6. Click Yes in answer to the displayed question in the Restart Analyzer? box.
7. When the installation is complete, click Exit.
Option Verification Procedure
Once the analyzer has restarted and the Network Analyzer program is again
running:
30
1
.
1
instructions on the supplied Option Entitlement Certificate.
Option Enable
then
. An option enable dialog box will appear.
will appear.
key is printed on the license message you received from Keysight. Enter
this key exactly as it is printed on the message.
Service
System
, then
Installation Note N5242-90015
,
Advertisement
