Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
Step 11.Assemble the A29 - A32 Test Port Coupler Assemblies
1. Remove the A29 test port 1 coupler and A32 test port 2 coupler from the
2. Discard the test port couplers you just removed from the PNA. These old
3. Follow the two instructions shown in
Figure 6
A29 - A32 Test Port Coupler Assembly
18
PNA. For instructions, click the Chapter 7 bookmark, "Removing and
Replacing the A29 - A32 Test Port Couplers" in the PDF Service Guide
couplers have 2.4 mm connectors and must be replaced with the new
couplers (3.5 mm connectors) included in the kit.
Table 1 on page 8
of this document.
"Downloading the Online PNA Service Guide" on page 6
1. See
Figure
6. New parts are listed in
.
Installation Note N5242-90015
1
.
Advertisement
