Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
"Step 23. Reinstall the Inner Cover."
"Step 24. Reinstall the Outer Cover."
"Step 25. Enable Option 400."
"Step 26. Perform Post-Upgrade Adjustments and Calibration."
"Step 27. Prepare the PNA for the User."
Step 1.Obtain a Keyword and Verify the Information
Follow the instructions on the Option Entitlement Certificate supplied to obtain
a license key for installation of this upgrade. Refer to
Redemption" on page
Verify that the model number, serial number, and option number information
on the license key match those of the instrument on which this upgrade will be
installed.
If the model number, serial number, or option number do not match those on
your license key, you will not be able to install the option. If this is the case,
contact Keysight for assistance before beginning the installation of this
upgrade. Refer to
Once the license key has been received and the information verified, you can
proceed with the installation at step 2.
Step 2. Remove the Outer Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
Step 3.Remove the Inner Cover
For instructions, click the Chapter 7 bookmark "Removing the Covers" in the
PDF Service Guide
Step 4.Remove the Front Panel Assembly
For instructions, click the Chapter 7 bookmark "Removing and Replacing the
Front Panel Assembly" in the PDF Service Guide
Step 5.Remove the A19 Test Set Motherboard
For instructions, click the Chapter 7 bookmark "Removing and Replacing the
A19 Test Set Motherboard" in the PDF Service Guide
12
5.
"Contacting Keysight" on page
1
.
1
.
"Downloading the Online PNA Service Guide" on page 6
1. See
"License Key
4.
1
.
1
.
.
Installation Note N5242-90015
Advertisement
