Verifying The Installation - HP 12500 Series Installation Manual

Verifying the installation

WARNING!
A 12504 has one power switch, a 12508 has one power switch, and a 12518 has two power switches.
Make sure you have turned off the power before checking the installation to avoid bodily injury and switch
damage.
After the installation is completed, verify the installation against the following list. Be sure that all check
results are positive.
Table 13 Installation checklist
Item
The grounding cable is correctly grounded.
Fan trays are correctly installed and make close contact
with the backplane.
Power supplies are correctly installed and have close
contact with the frames.
The power switch is off (the power switch is at the OFF
position).
Power cords are correctly connected.
MPUs are correctly installed and have close contact with
the backplane.
LPUs are correctly installed and have close contact with
the backplane.
Switching fabric modules are correctly installed and have
close contact with the backplane.
Result
Yes No
48
Remarks