Tennant 1240 Operator's Manual
Self-contained carpet extractor
Hide thumbs
Also See for 1240:
- Operator and parts manual (55 pages) ,
- Operator and parts manual (41 pages)
Related Manuals for Tennant 1240
Summary of Contents for Tennant 1240
- Page 1 1240/1260 Self-Contained Carpet Extractor English Operator Manual Model Part No.: M611370 - 1240 M611371 - 1260 611608 Rev. 01 (04-2006) *611608* www.tennantco.com Home Find... Go To..
- Page 2 P.O. Box 6 5400 AA Uden- -The Netherlands europe@tennantco.com www.tennantco.com Specifications and parts are subject to change without notice. Copyright E2001, 2006 Tennant Company. All rights reserved. EC DECLARATION OF CONFORMITY FOR MACHINERY (Directive 98//37/EEC, Annex II, sub A) Model: 1240/1260 nr.: M611370, M611371 TENNANT N.V.
-
Page 3: Table Of Contents
DRAINING LEFTOVER CLEANING SOLUTION ......Tennant 1240/1260 (04- -06) Home Find... Go To.. -
Page 4: Safety Precautions
Do not stretch cord. Do not handle plug with wet hands. Keep cord away from heated surfaces. Report machine damage or faulty operation immediately. Follow mixing and handling instructions on chemical containers. Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 5: Machine Components
2. Remove solution tank lid and fill tank with 38L (10 gal) of hot water, 60°C (140°F) maximum (Figure 1). FIG. 3 FIG. 1 Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 6: Machine Operation
Use a recommended foam control solution to before disconnecting hose. Squeeze trigger for prevent motor damage. five seconds after turning off switches. ATTENTION: Excessive foam buildup will not activate the float shut-off screen. Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 7: Draining Tanks
3. Remove solution tank lid and vacuum out leftover solution. 3. Inspect power cord and cord grip for damage. Replace immediately if damaged. 4. Drain recovery tank. Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 8: Monthly Maintenance
To access internal components for repair, open machine as described below: 1. Remove two hex--head bolts at front of machine, using a 9/16” wrench. ATTENTION: Make sure tanks are empty before opening. Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 9: Trouble Shooting
Improper spray tip size or spray angle. Replace with proper tips. Worn spray tips. Replace spray tips. Solution tank low or empty. Refill solution tank. Faulty solution pump. Contact Service Center. Plugged solution tank filter. Clean filter. Tennant 1240/1260 (02- -01) Home Find... Go To.. -
Page 10: Specifications
240V,1.8 hp, 5.8A, 1.4kW, 2 stage SEALED WATER LIFT 3.5 m (137 in) 3.5 m (137 in) TOTAL POWER CONSUMPTION 230V, 6.5A, 1.64kW 230V, 6.5A, 1.64kW DECIBEL RATING AT >70dB(A) >70dB(A) OPERATOR’S EAR, INDOORS ON CARPET Tennant 1240/1260 (02- -01) Home Find... Go To..