Tennant ATLV 4300 Instruction Bulletin page 2

4. Mount the new latch plate (1) to the hopper with two
flat screws (3) and washers (4) if necessary.
5. Position the smaller latch piece over top of the new
latch plate (1). Mount the latch back in position by
securing the two new pan screws (2) into the threaded
holes in the new latch plate.
6. Mount the second new latch plate (1) under the
hopper latch on the other side following steps 2 thru 6.
7. Start the machine. Start the vacuum fan and check
the hopper for proper seal.
BILL OF MATERIALS FOR REAR LATCH MOUNT KIT, 368670
TENNANT
Ref. Part No.
1 368669
2 363503
3 09759
4 32490
2
Description
Plate, mtg, latch
Screw, pan, M6 X 1.0 X 12, Ss
Screw, flt, M06 X 1.0 X 12, 10.9
Washer, flat, 0.25 Std
TENNANT COMPANY
P. O. Box 1452
Minneapolis, MN 55440-1452
1
1
2
IB 340541 (4-02)
Qty.
2
4
4
4