ECS RS482M-M Manual page 45

LDT Bus Frequency (Auto)
This item allows users to manually adjust the LDT Bus Frequency.
PCIE Reset Delay (Disabled)
This item enables or disables the PCIE reset delay.
Press <Esc> to return to the Advanced Chipset Features page.
UMA Frame Buffer Size (Auto)
This item allows users to manually adjust the UMA frame buffer size, from 16MB to
128MB.
Aperture Size (128MB)
This item allows users to manually adjust the AGP aperture size, from 32MB to 2GB.
GFX Clock Mode (Sync)
This item allows users to set the GFX Clock Mode to be Sync or Async. When this item
is set to Sync, the following 3 item is activated.
• Async GFX Clock (200MHz): This item allows users to manually adjust the
GFX clock, from 200MHz to 350MHz.
• Async GFX Clock Source (14.318MHz OSC): This item allows users to set
the GFX Clock Source, either to be 14.318MHz OSC or 100MHz PCIE.
• MCLK Spread Spectrum (Disabled): This item allows users to enable or
disable the MCLK spread spectrum function.
Dual-Mode Interleaving (Disabled)
This item allows users to enable or disable the Dual-Mode interleaving function.
Dynamic CKE (Enabled)
This item allows users to enable or disable the Dynamic CKE function.
Video Display Devices (Auto)
This item allows users to manually select the video display device.
Tv Standard (NTSC)
This item allows users to manually select the TV picture format.
System BIOS Cacheable (Disabled)
This feature is only valid when the system BIOS is shadowed. It enables or disables the
caching of the system BIOS ROM at F0000h-FFFFFh via the L2 cache. This greatly
speeds up accesses to the system BIOS.
Press <Esc> to return to the main BIOS setting page.
Using BIOS
39