1. Manuals
  2. Brands
  3. ECS Manuals
  4. Motherboard
  5. RX480-A
  6. Manual

ECS RX480-A Manual

Hide thumbs
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

iii

Advertisement

Table of Contents
loading

Related Manuals for ECS RX480-A

Summary of Contents for ECS RX480-A

  • Page 3 Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0 Disclaimer The information in this document is subject to change without notice.

  • Page 4: Declaration Of Conformity

    Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.

  • Page 5: Table Of Contents

    T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction....................1 Feature......................2 Motherboard Components................4 Chapter 2 7 7 7 7 7 Installing the Motherboard Safety Precautions..................7 Choosing a Computer Case...............7 Installing the Motherboard in a Case............7...
  • Page 6 Integrated Peripherals..............36 Power Management Setup............40 PNP/PCI Configurations.............42 PC Health Status................43 Frequency/Voltage Control............44 Load Performance Defaults............45 Load Optimized Defaults.............45 Set Supervisor/User Password............45 Save & Exit Setup.................46 Exit Without Saving..............46 Chapter 4 47 47 47 47 47 Using the Motherboard Software About the Software CD-ROM..............47 Auto-installing under Windows 2000/XP..........47 Running Setup................48 Manual Installation..................50...

  • Page 7: Introducing The Motherboard

    ATA host controller that is SATA v1.0 compliant, supporting four SATA ports with maxi- mum transfer rate up to 150 MB/s each. The RX480-A motherboard is equipped with advanced full set of I/O ports in the rear panel, including PS/2 mouse and keyboard connectors, COM1, LPT1, four USB ports, one op-...

  • Page 8: Feature

    Feature Processor The RX480-A uses an 939-pin socket that carries the following features: • Accommodates AMD Sempron/Athlon64/Athlon 64 FX processors • Supports up to 2000MT/s HyperTransport (HT) interface speeds HyperTransport Technology is a point-to-point link between two devices, it enables integrated circuits to exchange information at much higher speeds than currently available interconnect technologies.
  • Page 9 Onboard LAN (Optional) This motherboard may support either of the following LAN with following features: • Support 10/100 Mbps N-way Auto-negotiation operation • Supports Wake-On-LAN function and remote wake-up • Supports LED pins for various network activity indications • Supports Full Duplex Flow Control (IEEE 802.3x) •...

  • Page 10: Motherboard Components

    Motherboard Components Introducing the Motherboard...
  • Page 11 Table of Motherboard Components LABEL COMPONENT 1 CPU Socket Socket 939 for AMD K8 processor 2 CPU_FAN CPU cooling fan connector 3 DIMM1~4 184-pin DDR SDRAM slots 4 ATX_POWER Standard 24-pin ATX power connector 5 CLR_CMOS Clear CMOS jumper 6 PWR_FAN* Power fan connector 7 IDE2 Secondary IDE channel...
  • Page 12 Memo Introducing the Motherboard...

  • Page 13: Installing The Motherboard

    Make sure that your case supports all the features required. Secondly, RX480-A supports one or two floppy diskette drives and four enhanced IDE drives. Make sure that your case has sufficient power and space for all drives that you intend to install.

  • Page 14: Checking Jumper Settings

    Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered.

  • Page 15: Checking Jumper Settings

    Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper Type Description Setting (default) 1-2: CLEAR CLR_CMOS 2-3: NORMAL CLR_CMOS 3-pin CLEAR CMOS Before clearing the CMOS, make sure to turn off the system.

  • Page 16: Connecting Case Components

    Connecting Case Components After you have installed the motherboard into a case, you can begin con- necting the motherboard components. Refer to the following: Connect the CPU cooling fan cable to CPU_FAN. Connect the system cooling fan connector to SYS_FAN. Connect the power fan connector to PWR_FAN.
  • Page 17 CPU_FAN/SYS_FAN/PWR_FAN: FAN Power Connectors Signal Name Function System Ground Power +12V +12V FAN_TAC Sensor J1: Internal Speaker Signal Name Signal ATX12V: ATX 12V Power Connector Signal Name Ground Ground +12V +12V ATX_POWER: ATX 24-pin Power Connector Signal Name Signal Name +3.3V +3.3V +3.3V...

  • Page 18: Front Panel Header

    Front Panel Header The front panel header (PANEL1) provides a standard set of switch and LED headers commonly found on ATX or micro ATX cases. Refer to the table below for information: Signal Function Signal Function HD_LED_P Hard disk LED(+) FP PWR/SLP *MSG LED(+) HD_LED_N Hard disk LED(-) FP PWR/SLP *MSG LED(-)

  • Page 19: Installing Hardware

    Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sure that you DO NOT scratch the motherboard or any of the surface-mount resistors with the clip of the cooling fan. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components.

  • Page 20: Cpu Installation Procedure

    CPU Installation Procedure The following illustration shows CPU installation components. Install your CPU. Pull up the lever away from the socket and lift up to 90-degree angle. Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly.

  • Page 21: Installing Memory Modules

    Installing Memory Modules This motherboard accomodates four memory modules. It can support four 184-pin 2.5V unbuffered DIMM, DDR 400/333/266. The maximum memory capacity is 4GB. You must install at least one module in any of the two slots. Each module can be installed with 256MB to 1GB of memory.
  • Page 22 Table A: Unbuffered DIMM Support for 939-pin Maximum Chip Selects Data DRAM Speed MEMCS_1L_L* MEMCS_1H_L* MEMCS_2L_L* MEMCS_2H_L* DDR400 DDR400 Single rank DDR400 DDR400 Double rank DDR400 DDR400 Single rank DDR400 DDR400 Double rank DDR333 DDR400 Single rank Single rank bits DDR200 DDR400 Single rank Double rank...

  • Page 23: Installing A Hard Disk Drive/Cd-Rom/Sata Hard Drive

    Installing a Hard Dish Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD-ROM drive. About IDE Devices Your motherboard has two IDE channel interfaces (IDE1 & IDE2). Two IDE ribbon cables supporting four IDE devices is bundled with the motherboard.
  • Page 24 About SATA Connectors This motherboard features four SATA connectors supporting a total of four drives. SATA , or Serial ATA (Advanced Technology Attachment) is the standard interface for the IDE hard drives which are currently used in most PCs. These connectors are well designed and will only fit in one orientation.

  • Page 25: Installing A Floppy Diskette Drive

    Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive (FDD) interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives. You can install a 5.25-inch drive and a 3.5-inch drive with various capacities. The floppy diskette drive cable has one type of connector for a 5.25-inch drive and another type of connector for a 3.5-inch drive.

  • Page 26: Installing Add-On Cards

    Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increase the motherboard’s capabili- ties by adding hardware that performs tasks that are not part of the basic system.
  • Page 27 Follow these instructions to install an add-on card: Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. Secure the metal bracket of the card to the system case with a screw.

  • Page 28: Connecting Optional Devices

    Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: AUDIO2: Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access. Signal Name Signal Name Function AUD_MIC Front Panel Microphone input signal...
  • Page 29 IR1: Infrared header The motherboard supports an Infrared (IR1) data port. Infrared ports allow the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants (PDAs), and other computers. Signal Name RSVD No Pin IR Power, +5V Ground...
  • Page 30 USB3/4: Front Panel USB header The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, there are two USB headers onboard. Use the auxiliary USB headers to connect the front- mounted ports to the motherboard. Signal Name Function USBPWR...

  • Page 31: Connecting I/O Devices

    Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications devices.
  • Page 32 Memo Installing the Motherboard...

  • Page 33: Using Bios

    Chapter 3 Using BIOS About the Setup Utility The computer uses the latest Award BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configura- tion status and provides you with options to set system parameters.

  • Page 34: Bios Navigation Keys

    Press DEL to enter SETUP Pressing the delete key accesses the BIOS Setup Utility: Phoenix-AwardBIOS CMOS Setup Utility: Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Performance Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations...

  • Page 35: Updating The Bios

    Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new BIOS as follows: If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing.

  • Page 36: Standard Cmos Features

    Standard CMOS Features This option displays basic information about your system. Phoenix-AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Wed, Mar 29 2005 Item Help Time (hh:mm:ss) 9 : 33 : 26 IDE Channel 0 Master Menu Level IDE Channel 0 Slave IDE Channel 1 Master Change the day, month, IDE Channel 1 Slave...
  • Page 37 If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. Choose the line that lists LBA for an LBA drive. IDE Channel 0/1 Master/Slave (Auto) Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel.

  • Page 38: Advanced Bios Features

    Advanced BIOS Features This option defines advanced information about your system. Phoenix-AwardBIOS CMOS Setup Utility Advanced BIOS Features Hard Disk Boot Priority [Press Enter] Item Help CPU Internal Cache [Enabled] External Cache [Enabled] Menu Level Quick Power On Self Test [Enabled] First Boot Device [Floppy]...
  • Page 39 First/Second/Third Boot Device (Floppy/Hard Disk/CDROM) Use these three items to select the priority and order of the devices that your system searches for an operating system at start-up time. Boot Other Device (Enabled) When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices.

  • Page 40: Advanced Chipset Features

    The disk drive software monitors the internal performance of the motors, media, heads and electronics of the drive. The host software monitors the overall reliability status of the drive. If a device failure is predicted, the host software, through the Client WORKS S.M.A.R.T applet, warns the user of the impending condition and advises appropriate action to protect the data.
  • Page 41 Timing Mode (Auto) This item allows you to set up the DRAM timing manually or automatically. This item is set to [Auto] by default. When setting to [Manua], the following items are adjustable. • Memclock index value (Mhz) (200MHz): When DDR Timing Setting by is set to Manual, use this item to set the DRAM frequency.

  • Page 42: Integrated Peripherals

    LDT Configuration (Enabled) This item enables or disables the LDT configuration. Upstream LDT Bus Width (16 bit) This item allows users to manually adjust the upstream LDT bus width to be 8 bit or 16 bit. Downstream LDT Bus Width (16 bit) This item allows users to manually adjust the downstream LDT bus width to be 8 bit or 16 bit.
  • Page 43 South OnChip IDE Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SIS OnChip IDE Device Item Help IDE DMA transfer access [Enabled] Onchip IDE Channel0 [Enabled] Onchip IDE Channel1 [Enabled] Menu Level IDE Prefetch Mode...
  • Page 44 South OnChip PCI Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SIS OnChip PCI Device Item Help Onboard AC97 AUDIO [Auto] Onboard PCI Lan [Enabled] Menu Level Onboard Lan Boot ROM [Disabled] Onboard 1394 [Enabled]...
  • Page 45 Onboard SuperIO Device (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility Onboard SuperIO Device Item Help Onboard FDC Controller [Enabled] Onboard Serial Port 1 [3F8/IRQ4] Menu Level Onboard Serial Port 2 [2F8/IRQ3] UART Mode Select [Normal]...

  • Page 46: Power Management Setup

    Power Management Setup This option lets you control system power management. The system has various power- saving modes including powering down the hard disk, turning off the video, suspending to RAM, and software power down that allows the system to be automatically resumed by certain events.
  • Page 47 Resume Event Control (Press Enter) Scroll to this item and press <Enter> to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility Resume Event Control Resume By PCI PME [Enabled] Item Help Resume By USB (S3) [Disabled] Resume by PCI-E [Enabled] Menu Level Resume By WOL/WOM/Ring [Disabled]...

  • Page 48: Pnp/Pci Configurations

    PNP/PCI Configurations These options configure how PnP (Plug and Play) and PCI expansion cards operate in your system. Both the the ISA and PCI buses on the motherboard use system IRQs (Interrup ReQuests) and DMAs (Direct Memory Access). You must set up the IRQ and DMA assignments correctly through the PnP/PCI Configurations Setup utility for the motherboard to work properly.

  • Page 49: Pc Health Status

    PC Health Status On motherboards that support hardware monitoring, this item lets you monitor the parameters for critical voltages, temperatures and fan speeds. Phoenix-AwardBIOS CMOS Setup Utility PC Health Status Item Help Shutdown Temperature [Disabled] Warning Temperature [Disabled] CPU Vcore Voltage Menu Level +2.5V +3.3V...

  • Page 50: Frequency/Voltage Control

    Frequency/Voltage Control This item enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. Phoenix-AwardBIOS CMOS Setup Utility Frequency/Voltage Control Item Help AMD K8 Cool ‘n’...

  • Page 51: Load Performance Defaults

    Load Performance Defaults If you select this item and press Enter a dialog box will appear. If you select [OK], and then Enter, the Setup Utility loads a set of performance default values. These default settings are quite demanding and your system might not function properly if you are using slower CPU, memory, or other low-performance components.

  • Page 52: Save & Exit Setup

    Supervisor Password has higher priority than User Password. You can use Supervisor Password when booting the system or entering BIOS Setup to modify all settings. Also you can use User Password when booting the system or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled.

  • Page 53: Using The Motherboard Software

    Chapter 4 Using the Motherboard Software About the Software CD-ROM The support software CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version.

  • Page 54: Running Setup

    Setup Tab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support Before installing the software from Windows Explorer, look for a file named README.TXT, INSTALL.TXT or something similar.
  • Page 55 Click Next. The following screen appears: Check the box next to the items you want to install. The default options are recommended. Click Next run the Installation Wizard. An item installation screen appears: Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence.

  • Page 56: Manual Installation

    Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.
  • Page 57 Caractéristiques Processeur La RX480-A utilise un socket de 939 broches ayant les caractéristiques suivantes : • Peut recevoir les processeurs AMD Sempron/Athlon64/Athlon 64 FX • Prend en charge des vitesses d’interface HyperTransport (HT) allant jusqu’à 2000MT/s La Technologie HyperTransport est une liaison point à point entre deux matériels, elle permet à...
  • Page 58 LAN interne (optionnel) Cette carte mère prend en charge les chipsets LAN suivants : • Supporte le fonctionnement en Auto-négociation N-Way en 10/100Mbps • Prend en charge la fonction Wake-On-LAN (WOL) (réveil par appel réseau) et le réveil à distance •...
  • Page 59 Feature Prozessor Das RX480-A verwendet einen 939-Pin Socket mit den folgenden Merkmalen: • Nimmt AMD Sempron/Athlon64/Athlon 64 FX Prozessoren auf • Unterstützt bis zu 2000MT/s HyperTransport (HT) Interface- Geschwindigkeiten HyperTransport Technologie ist ein Punkt-zu-Punkt Link zwischen zwei Geräten. Es ermöglicht integrierten Schaltkreisen einen Informationsaustausch mit wesentlich höherer Geschwindigkeit als bei gängigen Interconnect-Technologien.
  • Page 60 Integriertes LAN (optional) Dieses Mainboard kann einen der folgenden LAN-Chipsätze unterstützen: • Unterstützt den Betrieb bei 10/100Mbps N-Way Auto-Negotiation • Unterstützt Wake-On-LAN-Funktion und Remote-Wake-up • Unterstützt LED-Pins für die Anzeige verschiedener Netzwerkaktivitäten • Unterstützt Vollduplex-Flusskontrolle (IEEE 802.3x) • Enthält 10/100/1000 Transceiver •...
  • Page 61 Caratteristiche Processore RX480-A è dotata di una presa a 939 pin che offre le seguenti caratteristiche: • Compatibilità con processori AMD Sempron/Athlon64/Athlon 64 FX • Supporto di velocità di interfaccia HyperTransport (HT) fino a 2000 MT/s La tecnologia HyperTransport consente il collegamento point-to-point fra due dispositivi e quindi un trasferimento di informazioni tra circuiti integrati molto più...
  • Page 62 integrata (opzionale) La scheda madre offre supporto per uno dei seguenti chipset LAN: • Supporto di NWay Auto-negotiation a 10/100 Mbps • Supporto di funzionalità Wake-On-LAN e riattivazione remota del sistema • Supporto di pin LED per indicazioni di attività di rete •...
  • Page 63 Característica Procesador La RX480-A usa un zócalo 939-pin que lleva las sigtes. características: • Acomoda procesadores AMD Sempron/Athlon64/Athlon 64 FX • Soporta hasta las velocidades de interfaz 2000MT/s HyperTransport (HT) La Tecnología HyperTransport es un vínculo punto a punto entre dos dispositivos, habilita circuitos integrados para intercambiar la información en velocidades más rápidas que las...
  • Page 64 LAN Abordo (optativo) Esta placa principal puede soportar uno de los sigtes. chipset LAN: • Soporta operación de Autonegociación N-Way de 10/100Mbps • Soporta la función Wake-On-LAN y despertar remoto • Soporta pins de LED para varias indicaciones de actividad de red de trabajo •...
  • Page 65 Características Processador O RX480-A usa uma ficha de 939 pinos que comporta as seguintes características: • Acomoda processadores AMD Sempron/Athlon64/Athlon 64 FX • Suporta velocidades de interface de HyperTransportTM (HT) até 2000MT/ Tecnologia de HyperTransport Té um link ponto-a-ponto entre dois dispositivos, permite circuitos integrados para trocar informação a velocidades muito mais elevadas que as...
  • Page 66 Onboard LAN (opcional) Esta motherboard poderá suportar qualquer um dos seguintes conjuntos de chips LAN: • Suporta operação de Auto-negociação N-Way 10/100Mbps • Suporta função LAN de Despertar e despertar remoto • Suporta pinos LED para várias indicações de actividade de rede •...
  • Page 67 機能 プロセッサ RX480-A が採用した939ピン仕様のソケットは、次の特徴があります： • AMD Sempron/Athlon64/Athlon 64 FX プロセッサの搭載に対応 • 転送率が最大2000MT/秒までの HyperTransport (HT)インターフェース を採用 HyperTransport 技術とは、二つのデバイスを1対1( point-to-point)で接続する技 術であり、従来のインターコネクト技術に比較して、集積回路同士の情報交換を高速化 します。 チップセット RX480 Northbridge (NB)と SB400 Southbridge (SB)チップセットは、実証された信 頼性と性能を持つ革新的で拡張性のあるアーキテクチャに基づいています。 RX480 (NB) • 1つの x2 ( x4に拡張可能) A-Link Express インターフェース (PCI Express 1.0a に対応)でATI IXPに接続...
  • Page 68 オンボードLAN (オプション) 当マザーボードは次のLANチップセットのいずれかを搭載しております： • 10/100Mbps N-way自動ネゴシエーション操作をサポート • Wake-On-LANと遠隔wake-up機能をサポート • ネットワーク状態インジケータ用のLEDピンを搭載 • 全二重フロー制御(IEEE 802.3x)をサポート • 10/100/1000 トランシーバーを搭載済み • PCI v2.3, 32-bit, 33/66-MHzへの対応 • クロスオーバー検出機能と自動修正機能を搭載 • Wake-on-LANと遠隔 wake-upとの機能をサポート 1394a Fire Wire(オプション) • “IEEE Std 1394-1995 for a high-performance serial bus and IEEE Std 1394a-2000”の基準に完全対応...
  • Page 69 특성 프로세서 RX480-A 는 939 핀 소켓을 사용하여 다음과 같은 특성을 지닌다: • AMD 샘프론/애슬론64/애슬론 64 FX 프로세서 사용 • HyperTransport (HT) 인터페이스 속도 최대 2000MT/s 지원 HyperTransport 기술은 두 장치간의 point-to-point 링크로, 집적 회로가 기존의 상호 연결 기술 보다 더 빠른 속도로 정보를 교환할 수 있다.
  • Page 70 보드 내장 LAN (선택 사항) 본 마더보드는 다음과 같은 LAN 칩셋을 지원합니다: • 10/100Mbps N-Way Auto-negotiation 작업 지원 • Wake-On-LAN 기능 및 원격 wake-up 지원 • 다양한 네트워크 활동을 표시하는 LED 핀 지원 • Full Duplex Flow Control (IEEE 802.3x) 지원 •...
  • Page 71 功能 處理器 RX480-A採用1個939針插槽，該插槽具有如下特徵： • 可安裝AMD Sempron/Athlon64/Athlon 64 FX 處理器 • 支援高達2000MT/秒的HyperTransport (HT)介面傳輸速率 HyperTransport 技術為以點對點方式連接兩台設備的技術，藉此，積體電路間能夠以 後高於現有各種內部連接技術(interconnect technology)技術的速度來交換資訊。 晶片組 RX480 北橋(NB)及SB400 南橋(SB)晶片組在研發設計上採用了創新且具擴充性之架構， 具備優良的可靠性及性能。 RX480 (NB) • 1個 2倍速 (可擴充至4倍速) A-Link Express介面 (PCI Ex- press 1.0a 相容) 以連接ATI IXP • 支援1個繪圖介面用之PCI Express x16，完全符合PCI Express Base規格修訂版1.0a...
  • Page 72 內建區域網路 (選購) 本主機板搭載有如下其中一種LAN晶片組： • 支援 10/100Mbps N-way 自動協調作業 • 支援區域網路喚醒(Wake-On-LAN)及遠端喚醒功能 • 配有各種網路活動指示器用之LED接腳 • 支援全雙工流量控制(IEEE 802.3x) • 整合有10/100/1000 收發器 • 支援PCI v2.3, 32位元, 33/66-MHz • 具有跳接線偵測及自動修正功能 • 支援區域網路喚醒功能及遠距喚醒功能 1394a Fire Wire (選購) • 完全支援"IEEE Std 1394-1995 for a high-performance serial bus 及 IEEE Std 1394a-2000"...

  • Page 73: Onboard Lan

    功能 处理器 RX480-A 主板使用一个 939-pin 插座，此插座具有以下特点： • 支持 AMD Sempron/Athlon64/Athlon 64 FX 处理器 • 支持 2000MT/s HyperTransport (HT) 接口速度 HyperTransport 技术是一种在两台设备间进行点到点连接的技术，它可以让集成电 路使用比当前互连技术更高的速度进行信息交换。 芯片组 RX480 北桥 (NB) 和 SB400 南桥 (SB) 芯片组是基于一种新型的、可扩展的架构，能 提供已经证明的可靠性和高性能。 RX480 (NB) • 1 x2 (可扩展到 x4) A-Link Express 接口（符合 PCI Express 1.0a 标准）用于连接到...
  • Page 74 1394a 火线（可选） • 完全符合用于高性能串行总线的 IEEE Std 1394-1995 和 IEEE Std 1394a- 2000 • 2 个符合 IEEE Std 1394a-2000 标准的电缆端口，传输速率可达 400M bits/s 扩展选项 此主板提供如下扩展选项： • 1 个用于图形接口的 PCI Express x16 • 2 个 PCI Express x1 插槽 • 3 个 32 位 PCI v2.3 扩展槽 •...
  • Page 75 Характеристики Процессор Плата RX480-A использует 939-штырьковый сокет и обладает следующими характеристиками: • Размещает процессоры AMD Sempron/Athlon64/Athlon 64 FX • Поддерживает технологию 2000MT/s HyperTransport (HT) Технология HyperTransport обеспечивает связь двух устройств по протоколу point- to-point, позволяя гораздо более быстрый обмен информацией между интегральными...
  • Page 76 Встроенный сетевой адаптер LAN (опционально) Встроенный сетевой адаптер LAN обладает следующими характеристиками: • Поддерживает автоматическое определение скорости и режима соединения 10/100Mbps • Поддерживает функции Wake-On-LAN и remote wake-up • Поддержка светодиодов для индикации различной активности в сети • Поддерживает режим управления потоком Full Duplex Flow Control (IEEE 802.3x) •...
  • Page 77 Cechy Procesor Płyta główna RX480-A dostosowana jest do 939-nóżkowego gniazda i posiada następujące właściwości: • Obsługuje procesory firmy AMD typu Sempron/Athlon64/Athlon 64 FX • Obsługuje złącze HyperTransport (HT) z szybkością do 2000MT/s Technologia HiperTransportu jest protokołem komunikacji między dwoma urządzeniami, który umożliwia układom zcalonym wymieniać...
  • Page 78 Zintegrowana obsługa sieci LAN (opcjonalnie) Zintegrowana obsługa sieci LAN posiada następujące właściwości: • Obsluguje N-drożne automatycznie ustalane operacje z szybkościami 10/ 100Mbps • Obsługuje funkcję Wake-On-LAN i zdalnie sterowane wake-up (uruchamianie komputera) • Obsługuje diody świetlne sygnalizujące różne aktywności w sieci •...
  • Page 79 Vlastnosti Procesor Základní deska RX480–A využívá 939kolíkovou patici nabízející následující vlastnosti: • Podpora procesorů AMD Sempron/Athlon64/Athlon 64 FX • Podpora rychlostí rozhraní HyperTransport (HT) až 2000 MT/s Technologie HyperTransport je přímým spojením mezi dvěma zařízeními, umožňující integrovaným obvodům výměnu informací vyššími rychlostmi, než jaké nabízejí současné technologie.
  • Page 80 Vestavění síťové rozhraní LAN (volitelně) Vestavěné síťové rozhraní LAN nabízí následující možnosti: • Podpora 10/100Mbps N–cestného automatického přepínání provozu • Podpora funkce Wake–On–LAN a aktivace na dálku • Podpora kolíků LED pro různou indikaci síťové činnosti • Podpora plně duplexního řízení toku dat (IEEE 802.3x) •...
  • Page 81 Caracteristici Procesorul RX480-A utilizează un soclu de 939 de ace care are următoarele caracteristici: • Funcţionează cu procesoare AMD Sempron/Athlon64/Athlon 64 FX • Suportă interfeţe HyperTransport (HT) cu viteze de până la 2000 MT/s Tehnologia HyperTransport este o legătură punct-la-punct între două aparate, care permite viteze mult mai mari de schimb al informaţiilor între circuitele integrate, decât cel asigurat de...
  • Page 82 Onboard LAN (opţional) Onboard LAN are următoarele caracteristici: • Suportă operaţii de autonegociere N-way de 10/100 Mbps • Suportă funcţia Wake-On-LAN şi trezirea de la distanţă • Suportă ace LED pentru a indica diversele activităţi din reţea • Suportă controlul proceselor de duplex total (IEEE 802.3x) •...
  • Page 83 Спецификация Процесор RX480-A използва сокет 939-pin със следните спецификации: • Поддръжка на процесори AMD Sempron/Athlon64/Athlon 64 FX • Поддръжка на технологията HyperTransport (HT) със скорост до 2000MT/s Технологията HyperTransport е връзка точка-до-точка (point-to-point) между две устройства, която предоставя възможност интегрираните вериги да обменят...
  • Page 84 Интегриран мрежов контролер (опция) Спецификация на интегрирания мрежов контролер: • поддръжка на 10/100Mbps, N-Way Auto-negotiation operation • поддръжка на функция за “събуждане” Wake-On-LAN и дистанционен wake-up • LED-индикатори за мрежова активност • поддръжка на Full Duplex Flow Control (IEEE 802.3x) •...
  • Page 85 Jellemző Processzor Az RX480-A 939 tűs foglalattal rendelkezik, ennek jellemzői pedig a következők: • AMD Sempron/Athlon64/Athlon 64 FX processzorokkal működik • Maximum 2000 MT/s HyperTransport (HT) sebességű interfészt támogat A HyperTransport technológia egy ponttól pontig való kapcsolat két készülék között, és segítségével az integrált áramkörök közötti információcsere sebessége sokkal nagyobb, mint a...
  • Page 86 Alaplapon levő LAN (választható) Az alaplapon levő LAN jellemzői: • 10/100Mbps N-Way automatikus beállítással • Támogatja a Wake-On-LAN funkciót és a távoli ébresztést • LED csatlakozótűket támogat különféle hálózati tevékenység-kijelzõk számára • Támogatja a teljes duplex folyamatvezérlést (IEEE 802.3x) • Integrált 10/100/1000 adó-vevő...

Table of Contents