Dometic 10 Series Installation Manual page 22

Connecting the refrigerator
I
NOTE
•
The device plug must be easily accessible so that you can unplug it if
required, thereby disconnecting the refrigerator from the power.
•
The device plug must not be placed directly behind the ventilation
grill in order to prevent the air circulation from being impaired and to
protect the device plug from splashes of water.
•
The device plug of the AC connection cable must not be cut off.
•
The connection cables must be laid so that they do not come in con-
tact with hot parts of the unit/burner or with sharp edges.
•
Changes to the internal electrical installation or the connection of
other electrical components (e.g. extra third party fans) to the inter-
nal wiring of the refrigerator will void any claims from the guarantee
and product liability.
•
The refrigerator has a CI bus interface and can be controlled through
a compatible central vehicle display.
➤ Connect the refrigerator according to fig. j, page 10.
Item in
fig. j,
Description
page 10
1 Gas burner
2 Power module
3 Display
4 Internal battery
5 Frame heater
6 Interface RS232 (optional)
7 CI bus grounding (not used)
8 CI bus data:
9 Light, including reed contact
10 S+ (optional)
22
Pin 5: green (+)
RMD10
AMP plug
EN