Dometic 10 Series Installation Manual page 13

RMD10
!
CAUTION!
•
Danger of crushing! Do not place your hand on the hinge.
•
Before activating, ensure that the power supply line and plug are dry.
A
NOTICE!
•
During transport, hold the refrigerator only by the refrigerator body.
Never hold the refrigerator by the absorber unit, the cooling fins, the
gas lines, the door or the control panel.
•
Make sure that the refrigerator circuit is not damaged during transpor-
tation. The refrigerant in the refrigerant circuit is highly flammable.
In the event of any damage to the refrigerant circuit (smell of ammo-
nia):
– Switch off the refrigerator.
– Avoid naked flames and sparks.
– Air the room well.
•
Do not install the refrigerator near naked flames or other heat sources
(heaters, gas ovens etc.).
•
Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the refrigerator is sufficiently
far away from walls or other objects so that the air can circulate.
•
Check that the voltage specification on the type plate is the same as
that of the energy supply.
•
Do not open the refrigerant circuit under any circumstances.
•
Only use the AC connection cable supplied to connect the refrigera-
tor to the AC mains.
•
Only use cables with a suitable cross-section.
•
Never pull the plug out of the socket by the connection cable.
•
The refrigerator may not be exposed to rain.
EN
Safety instructions
13