Pan Detection; Residual Heat Indication; Booster Function - Silverline Luna Flow-in Instructions For Use Manual

Pan detection

The pan detection ensures perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level setted before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After switching off a heating zone or the complete stop of the hob, the heating zones are still hot
and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burns and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 5 minutes with an ultra high power.
The booster for example rapidly heats up big quantities of water, like noddles cooking.
•
Start up / Stop the booster function :
Action
Zone selection
Increase power
Start up the booster
Stop the booster
•
Power management :
The whole cooking hob is equipped by a maximum of power. When the booster function is
activated, and not to exceed the maximum power, the electronic system automatically
reduces the power level of another heating zone. The display blinks on [ 9 ] during a few
seconds and then shows the maximum of power allowed.
Heating zone selected
[ P ] is displayed
Control panel
Press key [ ] from the zone
Press key [ + ]
Press key [ + ]
Press key [ - ]
The other heating zone: (example: power level 9)
[ 9 ] goes to [ 7 ] depending the type of zone
10
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ] during 5 min
[ 9 ]