Before using your hob • Read this guide, taking special note of the 'Safety Warnings' section. • Remove any protective film that may still be on your Ceramic hob. Using the touch controls • The controls respond to touch, so you don't need to apply any pressure. •...
Always lift pans the ceramic hob - do not slide, or they may scratch the glass. Using your ceramic Hob To start cooking 1. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface Of the cooking zone are clean and dry.
• If you don't choose a heat setting within 20 seconds, the ceramic hob will automatically switch off. You will need to start again at step 2. • You can modify the heat setting at any time during cooking. Using child lock function •...
Page 20
Brown Blue Green/Yellow p_:_I Grey Brown Black Blue Green/Yellow p�I 1� • If the ca ble is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated tools to avoid any accidents. • If the appliance is being connected directly to the mains an om ni polar circuit-breaker must be installed with a minimum opening of 3mm between contacts.
Need help?
Do you have a question about the PEK1000 and is the answer not in the manual?
Questions and answers