4.16 Loading and transport
Danger
!
Danger of accident!
Use only strong and stable loading ramps.
Make sure that no persons are endangered if
the machine should turn over or slip off.
Lash the machine down so that it is properly
secured against rolling off, slipping and turn-
ing over.
Do not step or stand under loads being lifted.
Always use shackles on the lifting points to
load, lift or lash down the machine.
Always check the fastening of the central lift-
ing hook before attempting to lift the machine.
Fig. 73
After driving the machine on the transport ve-
l
hicle swing the articulation lock 1 (Fig. 73) out
of its receptacle to the front. Insert the pin (2)
and secure it with the cotter pin (3).
BW 80 AD-2 Fam.
Fig. 74
Lash the machine to the transport vehicle, at-
l
tach the lashing gear (Fig. 74) to the front and
rear frames.
On BW 80 AD/ADH-2 use the fastening hooks
l
to attach the lashing tackle for lashing the ma-
chine down.
Fig. 75
To lift the machine attach the lifting gear to the
l
central lifting device (Fig. 75).
BOMAG
Operation
51