Advertisement
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 20 seconds away at
724-746-5500 or blackbox.com.
About Black Box
Black Box Network Services is your source for more than 118,000 networking
and infrastructure products. You'll find everything from cabinets and racks and
power and surge protection products to media converters and Ethernet switches
all supported by free, live 24/7 Tech support available in 20 seconds or less.
Copyright 2010. All rights reserved.
©
724-746-5500 | blackbox.com
040-L11000-001A 7/10
DFCS XG Standalone
Works as a 10G copper-to-fiber converter, fiber mode
converter, WDM transponder, or fiber repeater.
Supports Pluggable 10 Gigabit Transceivers
- XFP to XFP
- SFP+ to XFP
- SFP+ to SFP+
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
Support
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
Information
PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com
July 2010
LMC11002A
LMC11012A
LMC11022A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Black Box LMC11002A
Summary of Contents for Black Box LMC11002A
- Page 1 724-746-5500 or blackbox.com. About Black Box Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 20 seconds or less.
-
Page 2: Instrucciones De Seguridad
DFCS XG Standalone NOM Statement 5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, FEDERAL COMMUNICATIONS COMMISSION AND cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS etc.. -
Page 3: Trademarks Used In This Manual
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean TRADEMARKS USED IN THIS MANUAL derramados sobre la cubierta u orificios de ventilación. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. 18. Servicio por personal calificado deberá ser provisto cuando: Any other trademarks mentioned in this manual are acknowledged to be A: El cable de poder o el contacto ha sido dañado;... - Page 4 (more common) and those which require an external clock source (less common). The transceivers installed in the LMC11002A must have matching speeds. These switches are for XFP to XFP (LMC11002A) model only with XFP transceivers requiring external clocking. All other configurations including LMC11022A, LMC11012A and the If both XFPs are internally clocked, the XG will automatically support rates from 9.9Gbps to...
-
Page 5: Installation Procedure
(Rx) is attached to the transmit side. All combinations except UP, UP, UP Symmetrical Fault Detect (SFD)* NOTE: FOR LMC11022A AND LMC11002A BOTH TRANSCEIVERS MUST BE INSTALLED Self Diagnostic Circuit Test FOR THE XG TO PROPERLY FUNCTION. WHEN ONLY ONE XFP TRANSCEIVER IS... -
Page 6: Verify Operation
DFCS XG Standalone NOTES 3) VERIFY OPERATION Once the module has been installed and configured per steps 1 and 2, verify the module is operational by viewing the LED indicators. NOTE: THE XG P1 AND P2 LINK LEDS (LK) WILL TURN ON (GREEN) WHEN BOTH TRANSCEIVERS ARE INSTALLED AND PROPERLY CABLED TO THE CONNECTED EQUIPMENT.
Need help?
Do you have a question about the LMC11002A and is the answer not in the manual?
Questions and answers