Dfcs xg standalone works as a 10g copper-to-fiber converter, fiber mode converter, wdm transponder, or fiber repeater (6 pages)
Summary of Contents for Black Box LMC009A-R5
Page 1
LMC009A-R5 Compact Media Converter TP/BNC 50-ohm Converts twisted-pair to 50-ohm coax cable. This converter uses already-installed 50-ohm analog cable, so you won’t have to re-cable.
Page 2
Class A certified device. This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of Industry Canada. Page 2 724-746-5500 | blackbox.com LMC009A-R5...
Page 3
Following these steps through proper disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about proper disposal, please contact local authorities, waste disposal services, or the point of purchase for this equipment. LMC009A-R5 724-746-5500 | blackbox.com Page 3...
45 connector and one RG-49 BNC connector. Each Compact Media Converter TP/BNC includes diagnostic LEDs and an internal 100/240 V AC power supply. Part Number Part Number Description LMC009A-R5 Compact Media Converter TP/BNC 50-ohm Page 6 724-746-5500 | blackbox.com LMC009A-R5...
The Compact Media Converter TP/BNC converters come ready to install. Deploy Compact Media Converter TP/BNC units in pairs, or connect a Compact Media Converter TP/BNC converter to another Black Box converter. To install a Compact Media Converter TP/BNC converter, first make sure that the unit is placed on a flat surface.
(See the diagram in the Compact Media Converter TP/BNC 50-ohm Front Panel section.) If a ‘T’ connector/terminator is used, this switched must be set in the OFF (disabled) position. Otherwise, double termination will result, which will corrupt the signal. Page 8 724-746-5500 | blackbox.com LMC009A-R5...
Chapter 5: Contacting Black Box 5. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day, 7 days a week. Call: 724-746-5500 or Fax: 724-746-0746...
2. Dust caps are installed at Black Box to ensure factory-clean optical devices. These protective caps should not be removed until the moment of connecting the fiber cable to the device.
WARNING! Integrated circuits and fiber optic components are extremely susceptible to electrostatic discharge damage. Do not handle these components directly unless you are a qualified service technician and use tools and techniques that conform to accepted industry practices. LMC009A-R5 724-746-5500 | blackbox.com Page 11...