Operation - Prince Castle DCFT-MCD Series Service Manual

Turn unit ON. Turn the
On/Off switch located
on back of toaster to
ON. The Prince Castle
DCFT screen will ap-
pear in the LCD display
for 3 seconds.
(Make sure front and
back doors are closed)
Wait through Warm-
Up. During Warm-Up,
the LCD display will
read "STATUS" and
"PLEASE WAIT...".
Warm-Up time, is about
10-15 minutes.
During Warm-Up the
front LED (Crew User
Interface) blinks. A
constant green light
indicates that the
toaster is ready.
BURN/ELECTRICAL SHOCK HAZARD! Platen
sections are HOT and can cause severe burns or se-
vere shock. Keep hands and objects out of the toaster
unit! Failure to exercise caution may result in serious
injury! Turn the unit off, unplug it and let it cool down
completely before touching or working on internal apparatus.
Watch for READY sta-
tus. When ready tem-
perature is reached, the
LCD display will read
"STATUS" and "READY".
A constant green light at
the front LED also indi-
cates that the toaster is
ready.
527-500revJ_EN

Operation

WARNING
View temperatures, if
desired. Pressing the
TEMPERATURE
button once will display
the front and rear
platen actual tempera-
tures. Pressing a sec-
ond time will return the
LCD display to the
READY screen.
Choose the
compression
adjustments.
Dial the front
platen adjustment
knob for the
product part
(Regular Heel,
etc.) that you will
be toasting in the
unit. Dial the rear platen adjustment knob for the
product part (Regular Crown, etc.) that you will be
toasting in the rear of the unit.
Because of variances in bun production, it may be
necessary to adjust the bun compression for the
Crown and Heel. The Club compression is not ad-
justable. Increase bun compression if buns are toast-
ed too light. Be careful not to over compress the
buns.
5
Vertical Toaster
DCFT-MCD Series
Printed in USA 10/18 © 2018