Operation - Prince Castle CTD Operation Manual

CTD & CTDE
Vertical Contact Toasters
Turn unit on. Turn the On/Off
1
switch, located on the lower right
side, toward the back, to the On
position.
The Prince Castle logo and version information will
appear in the display.
Wait through warm-up. On the
2
Warm-Up screen, you can view
the current recipe setting (none or
1 – 4), the set point temperature,
and the current platen
temperature as the unit warms.
The thermometer icon will be
flashing.
You can pause warm-up by
pressing the thermometer icon if
you want to change the set point.
The Run/Home screen will
appear. To change the set point:
A. Press the thermometer icon
on the bottom of the
Run/Home screen. The Edit
Run Parameters screen will
appear.
B. Press the Plus (+) symbol to
increase the set point or the
Minus (-) symbol to
decrease the set point.
C. Press the check mark to accept the setting. The
Warm-Up screen reappears and warm-up
continues.
NOTE: If you don't want to accept the change, you can
wait a minute and the Warm-Up screen reappears and
warm-up continues.
Printed in USA 10/18 © 2018

Operation

3
BURN/ELECTRICAL SHOCK HAZARD! Platen area
is HOT and can cause severe burns or severe
shock. Keep hands and objects out of the toaster
unit! Failure to exercise caution may result in
serious injury! Follow the Cool Down procedure
before touching or working on internal apparatus.
When the current platen
temperature reaches the set point
temperature, the Run/Home
screen appears.
Make any desired adjustments. Use the instructions in
4
Setting Adjustments to make changes to crush
adjustments, the Recipe that is running, the
Temperature set point, the Time/Speed set point and
the percentage of auxiliary heat (if you have that
option).
Begin continuous
5
feeding. Feed product
into top of toaster,
sending the crowns down
the left and the heels
down the right. The sides
to be toasted should face
the platen, which is in the
middle. Toasted product
will exit at the base of the
toaster.
4
WARNING
301-500rev02-EN