Table of Contents
Advertisement
Apply the Tamper-Evident Seal
4.11
After you have checked the installation and are satisfied that it is correct:
1. Attach blanking covers to any unused ports on the Qtanium 400, if necessary.
2. Apply Tamper-Evident Seal Liquid (inspector's lacquer) to all fuse holders, the
ground screw, and all connectors and blanking covers on the Qtanium 400, as
shown.
3. Tidy all wires with cable-ties to keep them away from any moving parts, heat
sources, or sharp metal edges.
4. Reconnect any of the asset's connectors that were unplugged during the installation
and replace all trim panels.
21
Qtanium 400 | Installation Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Qtanium 400 and is the answer not in the manual?
Questions and answers