TELETRAC NAVMAN iFace Quick Start Manual

iFace
QUICK START GUIDE
IN-VEHICLE COPY
© Copyright Teletrac Navman 2018
NZ edition
Functions of the iFace
DRIVER LOGON
Creating a new Driver
When you visit the "Driver Logon" app and your name doesn't
appear on the list, add youself by tapping on:
1. Tap "New Driver" (blue button).
2. Enter your drivers licence then select your state.
3. Tap the "OK" button to complete.
Logging on
To log on, find the "Driver Logon" button
which should appear orange.
If you or someone else is logged in,
the "Driver Logon" will appear green.
1. Tap the "Driver Logon" button and locate your name.
2. Select name and enter the last 4 digits of your licence.
3. On the confirmation window tap the "OK" button.
Push button to remove
iFace from cradle
Device can
be secured with m3
screws
SENTINEL
Make sure you're logged into
the iFace by following the
steps on the 'Driver Logon'
card. Next, select Sentinel
from the home screen.
From the 'Rule Summary' screen, you can see when the next
rest break is required according to fatigue laws.
1. To start recording fatigue, select the blue "Work/Rest" button
at the top.
2. Press the correct button according to the fatigue event you
wish to record.
If a driver forgets to change the status of their working times,
back office staff need to be notified, as changes can only be
made using NextGen.
Please note: Drivers are still legally required to fill out their
paper work diaries as required by law.