Fingerprint - Union Community AC-5000 User Manual

AC-5000 User Guide
ID is „12‟.
▶Enable 1:N
If checked ( ), this option enables fingerprint only authentication without inputting user
ID or card. Even if the user is registered with 1:N authentication, only 1:1 authentication
is permitted in the terminal where this option is not checked.
▶Card Only
If checked ( ), this option enables card only authentication without inputting fingerprint.
Even if the user is registered with (Card & FP) or (Card & PW), only authentication with
card is permitted in the terminal where this option is checked.
▶Template On Card
), this option enables authentication with the user‟s information and
If checked (
fingerprint recorded in the card without downloading the user in the terminal. In order
for this option to be operated, SCcard reader must be mounted and the server must set
which terminal uses that fingerprint card.
▶ Verify Multi-FP
If checked ( ), this function has all the registered fingerprints to be authenticated after
the user inputs ID (or Card). When this item is set to checked, the user must, without
fail, input user ID or card. In this case, Enable 1:N is automatically changed to
unchecked ( ).
This function is used for strict access control to special zones. For example, if the
user with ID „0001‟ is registered with 3 fingerprints they must input ID and complete the
authentication for three fingerprints.
In this case, the order of authentication for the 3 fingerprints is irrelevant, but the
fingerprints should be repeatedly input until authentication is successful. Authentication
will fail on a single occurrence of authentication failure.
▶ Blocking Time (sec)
This function prevents duplicate authentication for the same user within the preset time
period. When set to 0, it has no restriction. However, when set to a value larger than 0,
the user can be successful in re-authentication if the preset time (sec) has elapsed after
the success of the previous authentication.
▶NetErrTime(Sec) – Network error time setting (Sec)
If it is the server authorization mode and the network error time is set, you can set the
authorization waiting time.
For example, if you set the network error time as 5 seconds, the error message occurs
when there is no response of the server for 5 seconds (But, the user is considered to
be failed to authorize)
The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use
the [F4 (←)] key to cancel input during setting.

3.6.3. Fingerprint

Select ◆ [ENT~]  [4. System]  [3. Fingerprint] in the initial screen ◆, and the
following screen appears:
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
38