Buzzer Guide Announced During Operation; How To Register And Enter Correct Fingerprint - Union Community AC-2000 User Manual

AC-2000 User Guide

1.4. Buzzer guide announced during operation

When button
Ppik or card is
operated
Ppibik When failure
When success
Ppiririk

1.5. How to register and enter correct fingerprint

Correct fingerprint input method

Enter your fingerprint as if you take a thumbprint by using your forefinger if
possible.
The fingerprint cannot be correctly registered and entered only by your fingertips.
The center of the fingerprint should be touched with the fingerprint input section.
Enter the fingerprint of your forefinger if possible.

When using your forefinger, you can enter your fingerprint correctly and safely.
Make sure that the fingerprint is unclear or wounded.

Too dry, wet, blurry or wounded fingerprints are difficult to recognize. In this case,
the fingerprint of another finger should be registered.
UNIONCOMMUNITY Co., Ltd.
Songpa-gu, Seoul, 05836, Republic of Korea
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
- If the button is pressed or if the terminal reads the card
- If your finger may be released because your fingerprint
has been successfully entered
If authentication fails or the user's input is wrong
If authentication is successful or if the current user finishes
settings
/ 12F, Daemyung Valeon, 127, Beobwon-ro,
7