Union Community AC-5000 User Manual page 27

AC-5000 User Guide
3.3.1.5. FP Option
This is the setting related to fingerprints, and is the option that can be changed after
registering the fingerprint in advance. If the user selects it with the fingerprint already
registered, it only results in the failure buzzer sound.
3.3.1.6. Save
When the registration process is complete, press the [6] key to save it. The user settings
are not saved if the user doesn‟t press [6] key and exits by pressing the [F4 (←)] key.
The following is the LCD guidance message indicating the user can exit from the
registration process.
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
▶‟1:1 Level‟ (Initial setting: „0‟)
Is the item that determines the authentication level
for each registered user. By modifying this value, it
is possible to determine the authentication level per
registered user.
When set to „0‟, it conducts authentication using the
1:1 authentication level of the terminal.
▶Enable 1:N (Initial setting: „v‟)
When this option is checked, it‟s possible to
successfully authenticate using a fingerprint without
any user ID or card.
When registered normally with [6. Save] key pressed.
When registration failed after [6. Save] key pressed.
Means the user is not registered properly in accordance
with the authentication method. For example, the user
didn‟t register any fingerprint after setting it as the
authentication method, nor registered a card after setting
it as the authentication method.
In the case of [2. FP Register]
When fingerprint image is not in a good condition or
there is no fingerprint input within 10 seconds of the
fingerprint sensor lamp being on.
At the time of fingerprint registration, when the user
didn‟t input the same finger, but input a different finger.
27