Union Community AC-5000 User Manual page 25

AC-5000 User Guide
[4] for password. Basically, it is registered in the name of the user. Using the keys [7] and
[8], the user can modify as user or admin. Once the registration is complete, the user can
press [ENT] to save it. The user must press the [F4 (←)] key to cancel the registration
and exit from the menu.
※ Only a user registered as Admin can modify the operating environment of the terminal,
and Add/Modify/Delete the information about all users saved in the terminal. Therefore,
special care is required when registering Admin.
3.3.1.1. Auth Type
3.3.1.2. FP Register
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
Delete the existing value by pressing the [F4 (←)]
key, enter one of the 12 authentication types shown
on the screen, and then press the [ENT] key.
① Place finger on the sensor - refer to „1.8. How to
register and enter fingerprint„. Fingerprint must be
input twice, as below, in conjunction with the on
screen guidance.
When the fingerprint sensor is lit and the message
"Place Finger on sensor" is displayed, place a finger
on the window for fingerprint input - for 2~3 seconds -
until the light goes off.
②When the message „Place same Finger on
sensor„ is displayed, enter the fingerprint input once
again.
※When entering the fingerprint for the second time,
make sure the user has taken their finger off the
fingerprint input window after the first read.
25