Application - Union Community AC-5000 User Manual

AC-5000 User Guide
Terminal ID is a unique ID used by the authentication server for the purpose of identifying
the terminal having „1‟ as its default value. It must correspond to the entry/exit door ID set
in the server program - which can be input as a maximum of 8 digits.
▶ Authentication
This determines the priority for authentication between terminal and the network server.
Having „2. Terminal/Server‟ as its default value, operation is as follows in each mode:
1.Server/Terminal
2.Terminal/Server
3. Server Only
4. Terminal Only
Flexible designation is allowed depending on the circumstance, such as the number of
terminals connected to the server, the number of users authenticated, or network errors
etc. It is recommended to use „2. Terminal/Server‟ so concurrent authentications can be
attempted if 10> terminals are connected to the server, or if frequent network errors occur.

3.5. Application

Selecting „3. Application‟ in the main menu causes the following screen to appear:
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
▶Initial setting
Terminal ID: „1‟
Authentication: „2. terminal/server‟
Authentication is made by the server when it‟s connected to the
network, and by the terminal when it is disconnected from the
server due to network disturbance, etc.
Authentication is made by the terminal, even if the server is
connected, and authentication result transferred to the server on a
real-time basis.
However, authentication is made by the server when the input
user ID or card is not registered in the terminal (it doesn‟t attempt
server authentication in case of 1:N fingerprint authentication).
Although the user is registered in the terminal, authentication is
made via the server. Therefore, authentication cannot be
performed unless the server is connected.
Only users registered in the terminal are authenticated. When
connected to the server, the authentication results are transmitted
to the server on a real-time basis.
32