History] Screen; How To Add A Contact From The [History] Screen - Furuno FELCOM251 Operator's Manual

2. IP HANDSET OPERATIONS
2.3

[History] Screen

Up to 20 calls can be stored in the IP Handset. When the 21st call occurs, the oldest
logged call is deleted from the list.
To access the [History] screen, press the
Status icons
: Received
: Called
: Communication
successful
: Communication
failed
: Missed*
2.3.1

How to add a contact from the [History] screen

1. At the main screen, press the
2. Press
3. Press
4. Press the
5. Press
ter key.
Note: This menu appears in gray and is unavailable in the
following cases:
• The memory capacity is reached (200 contacts).
• A "No caller ID" number's history is selected.
6. Press
key.
7. Input a name of a party, then press the Enter key.
You can use a maximum of 20 characters. For how to input the name, see
paragraph 1.5.2.
8. Press
9. Input a speed dial number* if required, then press the Enter key.
Short dial numbers can range from 10 to 200.
For how to input the number, see paragraph 1.5.2.
*: Once registered, speed dial numbers allow you to dial a number using an ab-
breviated number. This feature is handy when assigned to regularly used num-
bers.
10. Press
When the contact is saved in the [Contacts] list, the message "Wait response...",
followed by "Applied." appears.
11. Press the
2-14
*: Calls received from an external number and which are not
answered from any handset are considered "missed" calls.
to open the [History] screen.
or to select a history to add.
key to open the sub-menu.
or to select [Add Contact], then press the En-
to select the [Name] field, then press the Enter
or to select the [Speed Dial] field, then press the Enter key.
to select [Add], then press the Enter key.
key to go back to the main screen.
key followed by
Date and time of call
Number. If the
number is registered
in the contacts list,
the name also
appears here.
key.
.