How To Transfer The Syslog To A Pc - Furuno FELCOM251 Operator's Manual

3. SETTINGS FOR IP HANDSET
3.6.4

How to transfer the syslog to a PC

You can transfer the syslog to a PC installing the syslog application.
1. In the [Admin Settings] menu, press
press the Enter key.
2. Press
For [OFF], go back to the [Admin Settings] menu. For [ON], go to step 3.
3. Press
• [Warning]: Syslog entries with a level of "Warning" or higher are transferred.
• [Notice]: Syslog entries with a level of "Notice" or higher are transferred.
• [Info]: Syslog entries with a level of "Info" or higher are transferred.
4. Press the Enter key to display the [Syslog IP] screen.
5. Press
6. Press the 0 to 9 key to input a part of the IP address of the PC in the cell.
7. Repeat steps 5 and 6 to input the IP address in the cells.
8. Press the Enter key to confirm the setting.
The message "Applied." appears.
9. Press the
3-20
or to select [OFF] or [ON], then press the Enter key.
or to select [Warning], [Notice], or [Info].
or to select a cell to input the IP address.
key to go back to the main screen.
to select the [Syslog Transfer] menu, then