Replacing A Skylight Actuator - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide

5.4.16 Replacing a Skylight Actuator

Impact on the System
Rotating skylight cannot be controlled.
Preparations


Procedure
Step 1 Label each cable based on the corresponding ports on the skylight actuator.
Step 2 Disconnect cables from the skylight actuator.
Step 3 Remove the failed skylight actuator from guide rails.
Figure 5-61 Removing the skylight actuator
Step 4 Install the reserved skylight actuator in the original position and connect the cables.
Step 5 Close the rotating skylight and use the TEST button on the smoke detector or multi-functional
sensor to verify that the rotating skylight can open smoothly.
Step 6 Synchronize the parameters of the skylight actuator on the ECC800 WebUI.
Step 7 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 8 Log in to the ECC800 WebUI, and edit the plan view by adding new devices.
Step 9 Check the parameters and communication status of the skylight actuator to ensure normal
communication.
----End
Issue 04 (2020-01-03)
Tools: ESD wrist strap, ESD gloves, Phillips screwdriver, step ladder, labels, marker
Material: skylight actuator
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
104