FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-55 Water sensor components
(1) Water detector
(4) Conversion cable end B,
connecting to water the
detection rope
Impact on the System
The water leakage of the data center cannot be sensed.
Preparations
Procedure
Step 1 Replace the water detector.
1.
2.
3.
4.
Issue 04 (2020-01-03)
Material: water sensor
Skill requirement: hardware installation engineers
Remove the conversion cable at the conversion port for the water detector and
conversion cable.
Remove the communication cable from the water detector.
Connect a new water detector to the conversion cable.
Secure the new water detector.
Copyright © Huawei Technologies Co., Ltd.
(2) Conversion cable end A,
connecting to the water detector
(5) Water detection rope end A,
connecting to the conversion
cable
5 Parts Replacement
(3) Conversion cable
(6) Water detection
rope
99