Parts Replacement For The Ecc800-Pro; Replacing An Ecc800 Main Control Module - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Personnel
Construction
personnel
After component replacement, re-commission the component to verify that it is functioning
properly.

5.4.1 Parts Replacement for the ECC800-Pro

5.4.1.1 Replacing an ECC800 Main Control Module

Prerequisites




Procedure
Step 1 Use the Back Up Current Settings function to record the ECC800 configuration information
or manually record the information.
Path: Maintenance > Configuration File > Back Up Current Settings
Step 2 Label each cable and antenna based on the corresponding ports on the ECC800 main control
module.
Step 3 Remove cables, the WiFi module, and antennas from the ECC800 main control module.
Step 4 Loosen the screws on both sides of the ECC800 main control module and pull the handles on
both sides of the ECC800 main control module to remove the main control module.
Issue 04 (2020-01-03)
Skill Requirements
component operations, and certified by Huawei.
Have an electrician certificate.
The ECC800 main control module is hot-swappable.
Before disconnecting cables from the ECC800 main control module, label the cables based
on the corresponding ports.
Tools: ESD wrist strap, ESD gloves, Phillips screwdriver, labels, marker
Materials: a new undamaged and undeformed ECC800 main control module of the
appropriate model
If the main control module is damaged, you may fail to log in to the ECC800. In this case, you cannot
back up the settings.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
55