Hyundai RTC 182 SURIP Instruction Manual page 42

C) ENCODING BITRATE (BY REMOTE HANDSET)
1) You can select the desired bitrate during encoding from CD or phono to USB, the selectable
range from 32 / 64 /96 /128 / 192 / 256 kbps.
2) Set in " PHONO" function (15) & remain stop mode.
3) Press the "INFO" function and the LCD display will show the default bitrate (128 kbps)
4) Press skip or
5) Press again the " info " to confirm the setting and the LCD display (18) resume to "PHONO"
mode
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
The system is able to erase the file stored inside the USB pen drive or SD card by following:-
A) SINGLE FILE DELETE
1. Preset at "USB" or "SD" mode.
2. Press and hold the "INFO" button for 3 seconds and the lcd display (18) will show (del ---001)
3. Press skip forward
4. Press the " REC " button to enter "YES / NO" mode and then press skip forward
backward to select "YES" or "NO". Press the " rec " button again to confirm the setting.
B) ALL FILES DELETE
1. Preset at "USB" or "SD" mode.
2. Press and hold the "INFO" button for 3 seconds and the lcd display (18) will show (del ---001)
3. Press and hold the "INFO" button to enter "YES / NO" mode and then press skip forward
or skip backward
4. Press the "REC " button again to confirm the setting.
REMARK :
- All the files inside the usb storage media or sd card will be deleted completely after confirming
to "YES" mode.
- Press "STOP" button once at remote handset to quite delete mode.
REMOVING OF USB / MEMORY CARD
To remove the USB / memory card, turn off the power or switch the function mode to either CD,
aux or tuner first. For USB port – un-plug it by pulling out the USB socket directly, for memory
card – press the memory card inward & then release, now the card being partially eject and you
can remove it by hand.
buttons (3) to select the desired bitrate for encoding.
or skip backward
To select "YES" or "NO".
button to select the file going to delete
EN - 42
or skip