Hyundai RTC 182 SURIP Instruction Manual page 40

PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
The system is able to decode and playback all MP3 /WMA file which stored in the memory media
with USB connecting port or SD/MMC memory card.
1. Set function selector (15) at CD/USB mode and then
press source button (6) to select "USB or CARD" mode.
2. Plug-in the USB plug with the face up & make sure it
going into completely or insert the memory card in the
direction of the arrow as shown in the label on the un-
derside of the memory card slot cover. Insert straight
without bending.Connecting the USB upside down or
backwards could damage the audio system or the storage
media (USB thumb drive / SD/MMC card). Check to be
sure the direction is correct before connection.
3. The system will start reading the storage media automatically
after connecting, and lcd display (18) will show the total
number of MP3/WMA files and total number of folder
being detected.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
REMARK
- The system can detect and read the file under MP3 and WMA format only though the USB
port.
- If connect the system to MP3 player via the USB socket, due to variances in mp3 encoding
format, some MP3 player may not be able to play via the USB socket. This is not a maufunction
of the system.
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to encode normal cd or turntable to MP3 format and recording at memory
media with USB connecting port or SD/MMC card.
A) CD ENCODING
I) ECNODING 1 TRACK
1. Perform normal playback of the cd track you want to encode & record,
2. Press "RECORD" button (9) during the playback of the desire track, unit will display "
and flashing. Encoding is performing now.
3. After completing of encoding, unit will stop playback automatically.
II) ENCODING 1 DISC
1. Place a CD with the printed side facing up inside the tray & then close the co door
2. Press the "RECORD" button (9) after focus search completed. Unit will display "
and flashing. Encoding is performing now.
3. After completing of encoding, unit will stop playback automatically.
EN - 40
" & " "
" & " "