Advertisement
Available languages
Available languages
3 - PROGRAM LEVEL #2
2.18
PROGRAM LOCKOUT (P
Press the button
certain programming displays from being viewed or set. Two settings are available:
Protection cancelled
Protection active
The program lockout can be cancelled by pressing the button
ATTENTION: press the button
erase all previous display setting; the electronic will reset to default values. The electronic
programming will have to be completely redone.
EXITING THE LEVEL 2 PROGRAMMING
Press again the button
Note: for further information, please contact our customer service.
37
l
)
. This display is identified by the letters "Pl". This display is used to prevent
Settings and displays able to be viewed or reset
with protection active
In service:
- Time of day
- Volume remaining
- Flow rate
- Totalizer
In programming level 1:
- Water hardness
- Water hardness after mixing valve (P)
- regeneration time
In programming level 2:
- Flow rate (Fr)
- Days since the last regeneration (d)
- Prior service volume used (E)
- Reserve capacity (rc)
- Previous days water usage (Pd)
for 25 seconds when the program lockout is not activated will
, the electronic comes back in service.
[Pl - - - OFF]
[Pl - - - - On]
for 25 seconds.
3200 ET & RM
E
N
G
L
I
S
H
Advertisement
