Toolbox Contents - Filament Innovations BFP-ICARUS Series Operating Manual

You and a friend can now remove the printer from the crate by carefully
rolling it off. The printer should still be in the shrink wrap at this time.

Toolbox Contents

We include a toolbox with the basic tools you will need to maintain your
machine, located inside the 3D Printer. These tools and accessories include:
 Metric Allen Key Set
 Bubble Level
 Micro-SD Card Adapter (MicroSD is in the touchscreen)
 Snips/Pliers
Next to the toolbox you will find a box that includes:
 110VAC Power Cord
 1.75mm PLA Spool
 Spool Holder
 Wyze IP/Internet WebCam
Last Revised on 4/25/19
9