Table of Contents
Advertisement
End gCode (copy and paste it in)
M104 S0 ; extruder heater off
M140 S0 ; heated bed heater off
G91 ; relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle to release some of
the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ; move Z up a bit and retract filament even more
G28 X0 ; move X min endstops so the head is out of the way
G90 ; absolute positioning
M84; disable motors
; music for the successful print
M400 ; Empty the movement buffer
M300 P200 S1000
G4 P201
M300 P200 S1250
G4 P201
M300 P200 S1100
G4 P201
M300 P200 S2000
G4 P201
M300 P200 S1500
G4 P201
M300 P200 S1000
G4 P201
M300 P200 S1300
G4 P201
M300 P200 S1000
G4 P201
M300 P300 S1500
M400 ; Empty the movement buffer
43
Last Revised on 4/25/19
Advertisement
Table of Contents
