Removing Removable Flash Memory Cards - Avaya Ethernet Routing Switch 8300 Series Installation Manual

2. Insert the card into the card receptacle.
3. Gently push the card in until it fits snugly in place.

Removing removable flash memory cards

Remove a removable flash memory card from the Ethernet Routing Switch 8393SF/CPU or
8394SF/CPU module to stop using it as a storage medium.
Procedure steps
1. Press the eject button to the side of the memory card receptacle on the Ethernet
2. Pull the flash memory card out of the card receptacle.
Installation — Chassis
Routing Switch 8393SF/CPU or 8394SF/CPU module.
The card pops out slightly.
Removing removable flash memory cards
May 2011 45